informational technologies – Page 2

Cartridges Mean Nintendo Switch Games Will Always Cost More

If you’re old enough to remember the original PlayStation launching, then you’ll know how big of a deal switching to optical media was. Rather than shipping an expensive cartridge full of chips, games were burnt on to less expensive compact discs. It didn’t take long for other home consoles to follow and discs have been the preferred media for home consoles ever since.

With the launch of the new Switch console, Nintendo is reverting back to cartridge media for a home console. Nintendo handhelds have stuck with cartridges ever since the Game Boy launched, but there wasn’t really any alternative. For a home console, though, it poses a big problem in the form of pricing.

Inevitably, cross platform games will be released targeting the Xbox One, PS4, and Switch. You only have to look at listings for several popular cross-platform games to see the challenge Switch developers (and Nintendo) face. If the price for some titles is $29.99 for PS4, on Switch it’s $39.99 (33% higher).

The reason is the manufacturing cost. Optical media products are relatively cheap to mass produce, and regardless of whether you burn 5GB or 40GB to a disc the media costs the same. Cartridges, however, are relatively-speaking much more expensive and Switch cartridges can escalate in price depending on whether you need 1GB, 2GB, 4GB, 8GB, 16GB or 32GB of storage. They also get more expensive per cartridge the smaller the batch ordered.

If you only own a Switch, then the price difference doesn’t really matter as you are stuck paying $39.99. However, many gamers will own, or plan to own, a PS4 and a Switch, much like many have owned a home console and a 3DS. In that case, Nintendo will lose out on cross-platform game sales to the PS4 or Xbox One due to the price differential. The PS4 / Xbox One are significantly more powerful than Switch meaning the same game will inevitably look better and run faster while also being cheaper.

The pricing issue is compounded by the fact Nintendo insists that digital versions of a game offered through the eShop must be priced the same as physical versions. So opting to invest in a large SD card and only downloading games won’t save you any cash.

With time and the continued success of the Switch, economies of scale should see manufacturing costs fall. But for the foreseeable future, Switch games are going to be more expensive than the same game on another platform. In fact, manufacturing costs will mean they are always more expensive to produce than the optical disc equivalent.

Will this impact a publisher’s decision to release games on Switch. Potentially, yes. But Switch sales will be key. If Nintendo continues to sell millions of units then the market exists to make releasing on the platform viable. And the more Switch sells, the bigger the cartridge orders can be, and therefore the cheaper they become.

FTI’s Falcon Media Dupli Line is designed to meet the professional media duplicators needs and a suitable product for the gaming industry. Benchmark and quality control tests prove that Dupli Line products have one of the lowest variability rates throughout the industry, which makes them a perfect solution for media duplication.

SOURCE: PCMag

At the Dawn of the Computer Age: Memories of the “Informational Revolution” Pioneers.

Do you remember your very first computer? Pretty much everyone does; most of the people in their mid-30s, early-40s can still remember these noisy big white boxes with huge square screens and clicking dial-up modems that took ages to download a plain-text news article or even a basic e-mail with no attachments. Well, it took almost 40 years for the technology to get to that point, and there are still alive today witnesses to how it all started in the basements of the world famous universities and colleges.

Joyce Wheeler is someone who saw it all in those early days. She also can still remember her very first computer, and one of the reasons for that is because it was one of the first computers anyone used.

Dr. Joyce Wheeler was among the pioneers of programming

It was EDSAC (Electronic Delay Storage Automatic Calculator), a “proto-computer” that was assembled and served scientists at the University of Cambridge back in 1949. Joyce Wheeler was a member of the scientists group who were working on their PhD degree under the supervision of famous astronomer Fred Hoyle. They were researching the reactions inside stars, in particular the star lifecycle stages and their length.

In order to perform the research, Joyce needed some powerful calculating equipment, since the inner workings of the nuclear furnace that keep stars shining is a very complicated problem to solve with use of a human brain, pencil and a piece of paper. Mathematics capable of describing this level of nuclear energy processes is pretty formidable: Joyce remembers that she had to solve a nasty set of differential equations that describe their behavior and composition.

A copy of Edsac is being built at the National Museum of Computing

Completing these calculations manually would almost certainly result in errors, inaccurate data and ultimately could – and probably would – affect the research outcomes. And here is where she met EDSAC – a machine built by Professor Maurice Wilkes, a technical device the size of several average size bedrooms, that was there to do the kind of calculations that Ms. Wheeler needed to be done to complete her advanced degree.

The first challenge for young astrophysics student was to learn the sophisticated language that machine could understand. She was quite familiar with the machine itself, since it was showcased to her prior the start of her degree course in 1954. Being keen to get her research done accurately, Joyce sat down with an instructions booklet and worked her way through dozens of the programming exercises from that pioneering programming manual. That little book was called WWG (after the names of the authors: Maurice Wilkes, David Wheeler and Stanley Gill).

The foundations of programming were laid down by Edsac's creators — The foundations of programming were laid down by Edsac’s creators

While learning the programming, Joyce (whose family name was Blacker at that time) got talking to David Wheeler, since one of her programs was helping to ensure that EDSAC was working well. They eventually got to know each other, fell in love and married in 1957.

Joyce remembers that exciting time in detail: she could not stop wondering what the machine could do for her work. She was able to study the programming quite fast due to her strong mathematical background: she became very quickly able to master the syntax into which she had to translate the endless complex equations.

At certain point of time she realized that programming is very similar to Maths in the sense that one can’t do it for too long.

“I found I could not work at a certain programming job for more than a certain number of hours per day,” Joyce Wheeler remembers. “After that you would not make much progress.”

Research students like Joyce Wheeler had to use Edsac at night

Sometimes the solution to some programming problems that worried her from time to time would come into her mind while she was doing some other things outside of the computer lab: like doing the laundry or having lunch.

“Sometimes it’s better to leave something alone, to pause, and that’s very true of programming.”

When the programming bit was finally done, Joyce Wheeler was allocated a timeslot to run her programs on the EDSAC: it was Friday night. She remembers that this period was perfect for her: there were no lectures the next day she had to attend.

As an operator she was granted the right to run the EDSAC alone, but she had to make sure that everything she did was recorded. A quite common occurence for all the early computers (and EDSAC was no exception) was unexpected crashes. Joyce remembers that only occasionally she was lucky enough to keep machine running all night, and if it did crash, there was little she was allowed to do to try to fix it. Even the cleaners were not allowed to get near EDSAC.

Dr. Wheeler showed Joyce one procedure, that allowed the recalibration of the EDSAC’s two kilobyte memory, but if that did not help, Joyce had no other choice but to stop her work for the night. But despite the regular crashes, she made steady progress on finding out how long different stars would last before they collapsed.

“I got some estimates of a star’s age, how long it was going to last,” she said. “One of the nice things was that with programming you could repeat it. Iterate. You could not do that with a hand calculation. We could add in sample numbers on programs and it could easily check them. I could check my results on the machine very rapidly, which was very useful.”

Now, you should understand that “rapidly” back in the 1950’s meant “not more than 30 minutes”. This is the time that EDSAC required to run a program. After that the results were printed out for the researcher to analyze them. After that you had to re-program and wait another couple of days to run another round of complex calculations. Despite all these delays, Ms. Wheeler felt that she was a part of something that would change the world.

“We were doing work that could not done in any other way,” she said. And even though EDSAC was crude and painfully slow by modern standards, she saw that a revolution had begun.

We at FTI never fail to get inspired by pioneering scientists like Dr. Wheeler, with their single-minded dedication and commitment to innovating new solutions to existing problems, often in lonely circumstances and running against the tide of conventional thinking, driving them to expand the frontiers of discovery and learning in ways that eventually become implemented into normal life for the entire global population. Innovation, research and patience are some of the core values we cherish at FTI, and no-one demonstrated these better than Dr Joyce Wheeler.

How to Let Your Media Speak for Itself?

Even though we live in the era of flash-memory, hard disc drives and cloud storage solutions, optical disc still remains number one choice for the offline data distribution and long-term information storage and archiving.

Optical disc - still leading archival tool — Optical disc – still leading archival tool

Just like a good old book, an optical media disc also has a cover that contains the summary of what is recorded on it – otherwise it would be impossible to distinguish two absolutely identical glowing circular pieces of pressurized polycarbonate from each other. A disc printable layer (sometimes called simply “label”) is something that gives a disc personality, lets it speak for itself and identifies what is recorded on it. It is important for this label to be vibrant and colorful to replicate the design that was initially tailored by the publisher, so that the end consumer will be able to understand what type of content is on the disc from the very first glance.

Vibrant and colourful disc label - good way to boost the sales potential of the media — Vibrant and colourful disc label – good way to boost the sales potential of the media

There were plenty ways to create the labels for the media: the most common method was to print the design on circular pieces of paper and glue it to the surface, but times have changed and not it is impossible to glue discs that spin at over 5000 RPM instead of 33 RPM back in the days of vinyl. Some manufacturers even tried to implement a technology of “in-drive label burning”, but the labels made with this technology were typically black and white and very faded.

For over a decade, Falcon Technologies International LLC prioritized its Research and Development efforts on printable surfaces and managed to implement high-tech solutions into its production process. FTI’s wide range of printable layers are designed to meet any professional media duplication industry requirements according to highest standards.

FTI is proud to introduce its brand new SMART GLOSSY printable layer – a surface that is able to illustrate your personalized graphics and labels brighter and shinier than ever before. FalconMEDIA Smart Glossy printable discs are perfect to create customized, long-lasting, ultra-vivid design disc labels. Our Research and Development team have invested significant resources to tailor this brand new technology to allows you to have superior image definition, color saturation and vivid quality of printed graphics.

Key Features of the Product:

Superior ink absorption and faster ink drying printable surface (best in class)
Better glossiness surface delivering full color, glossy photo quality printing
Excellent color whiteness
Consistent printing across the full surface giving excellent uniformity
Long lasting print surface
Excellent water resisitant quality makes the printable surface free from scratches, smudging and smearing in wet conditions
High yield on inkjet printer (economic ink consumption)
Excellent Black/White Contrast with economical ink saturation setting
Wider compatibility on all standard professional inkjet printers
Good handling characteristics to ensure smooth operation with leading robotic duplication and publishing systems

To conclude it would be fair to note here that in media duplication and distribution business it is very important to select the right supplier, that is able to ensure high quality of the optical media and compatibility with a wide range of mass-printing equipment.

CEO of Falcon Technologies International LLC participated in the panel discussion during the Ras Al Khaimah Finance and Investment Forum

Michael Gutowski, CEO of Falcon Technologies International LLC participated in the panel discussion on the importance of innovation in business during the Ras Al Khaimah Finance and Investment Forum on December 13th and 14th.

During the panel discussion Mr. Gutowski emphasized that currently FTI holds the status of the best professional optical media producer globally, which has been achieved for a number of reasons, one of them being the constant implementation of small innovations on a daily basis and continuous improvement of the production processes.

“People are as important as innovation,” – Mr. Gutowski stated during his speech, – “You can’t change everything in a single big shot, as creating an innovation culture is an every day process.”

Mr. Gutowski also pointed out that an essential part of the FTI’s success is company’s ability and willingness to “listen to customers” and meeting their needs, based on the comments and suggestions that they receive. Within FTI listening to customer feedback became and remains the key trigger which promotes innovative product development practicies.

During the panel discussion it was also noted that early stage businesses should consider seeking partners in areas of expertise that they do not have in-house experience to ensure an increased chance of successfully translating their core strengths into a product offering with wider market appeal and less perceived business weaknesses.

Critical Role of Data Archiving for the Financial Institutions

Finance is an excessively regulated industry, with many moving parts and data that must be monitored and reported in order to stay protected and compliant with all regulations. One of the most important aspects of regulatory compliance for banks and financial organisations is record keeping and archiving electronic communication data. With the right tools and plans in place, archiving compliance does not have to be a daunting task.

Financial institutions generate a lot of data, which has to be archived by law.

Brokers, dealers, investment advisors, lending agents, futures and transfer agents, and businesses like mortgage companies, credit unions, banks, hedge funds, private equity firms, exchanges, commercial and retail banks, lenders and insurers, payday lenders, foreclosure relief services and debt collectors are all required to capture, monitor and archive business related communication data for review, audits, eDiscovery, litigation, and compliance.

But how do you become compliant? Let’s just jump right into the What, Why, and How of archiving compliance for banking and financial organisations.

Compliance with data archiving regulations is vital prevention of cyber crimes.

In short, a financial institution of any kind should be archiving all business related electronic communication data.

Email has been around long enough that just about everyone realizes the need to have a complete and easily accessible email archive. But you should really be archiving every bit of electronic communication data created by your organization. This includes social media, instant messaging, and content created on mobile devices.

The most obvious reason to archive emails and other business communication data is that your business is regulated and thus, mandated to do so.

Another thing that has to be archived - corporate e-mails — Another thing that has to be archived – corporate e-mails

Another reason why you should archive, that isn’t obvious at first, is data leakage. If you have proprietary data, customer account, transactional or confidential information, you are obligated to make sure that it isn’t shared, either purposefully or accidentally. The use of email, social media, instant messaging, and mobile devices increases the ease at which your employees could share this type of data. Couple that with the fact that the line between personal and business communication is blurred on corporate mobile devices. In addition to data leakage, you need to guard against insider trading, inappropriate financial advice, and stating personal beliefs about a financial investment or trade as fact. Having an archiving solution provides you with protection against these threats by giving you oversight. This oversight on employee communication data, coupled with an effective communication policy, will not only discourage bad behavior, but will encourage proper behavior according to established policy. Your employees will know that, according to your policy, everything they communicate is being stored and can be accessed for review.

As you can see, almost every commercial entity produces and accumulates large amounts of various data on a daily basis, so the “archival question” is becoming more actual nowadays and will become even more critical in the future. Data storage and archival solutions in the age of “informational revolution” we live in are required to provide not only the big data storage and rendering capacities, but also ensure the integrity and accessibility of data for years, decades and centuries.

art4 Falcon Technologies International LLC’s Research and Development team have created a solution that complies with the archival needs and requirements of the financial institutions and government entities. Our FalconMEDIA Century Archival CDs and DVDs with golden and platinum reflective layers showed outstanding results during the internal and third-party benchmarking tests: data stored on these professional archival discs stays accessible and integer for more than 500 years – timeframe that is enough to archive data for almost 7 future generations of the humanity.
Source: GWAVA

The need for innovation and longevity in technology

Thirteen seems to be the unlucky number for Apple, with a decline in iPhone sales leading to the first revenue decline in 13 years. This has been attributed in part to the struggling Chinese economy, still the second-largest market in the world for Apple products behind the USA. The iPhone accounts for nearly two-thirds of Apple’s revenue. However the company sold 16% fewer iPhones than it had during the same period in 2015 and made 18% less profit from them. The total tally for the device was $32.9bn from 51.2m phones sold; the year previous Apple brought in $40.3bn from 61.2m phones.

So what is exactly driving the first annual revenue decline since 2001? Perhaps the entry price of the smartphone in the developing world is still a barrier, even among very inexpensive devices. The iPhone smartphones designed and marketed by Apple Inc. run Apple’s iOS mobile operating system with the first generation iPhone being released on June 29, 2007. Followed by the iPad, and both were constantly updated with new, highly-anticipated iterations which sold in their hundreds of millions around the world, sending the company’s sales to ever soaring heights. A year ago Apple sold $58bn worth of gadgets, this equates to nearly $650m a day in the first three months of the year.

The Apple Watch has been publicized by the company as a multi-billion dollar business, rivaling many classic watch brands. Thus So far Apple has not delivered a breakout detailing the number of units sold per quarter. Instead the Apple Watch revenue has been combined with other products including the iPod, Apple TV, and Beats. Samsung shipped 0.4 million of its Gear and Gear2 watches in both 2015 and 2016. However Garmin was the only brand to show growth with shipments of 0.6 million in the third quarter of 2016 compared with 0.1 million in 2015.

Apple has promised some “amazing innovations” in the pipeline. Such as new headphone ports which are dust-proof and waterproof, and the redesign of key buttons. Are these innovations going far enough and will the brand achieve longevity? Many see Apple’s iPhone 7 objective as a premium product and not innovation. The products no longer have their unique appeal and a point of mental saturation has been reached.

Google self-driving car project

In the battle for longevity, constant new ideas and innovation sees one stand out diverse innovation are the Google self-driving cars, this represents a new breed of autonomous cars, developed by Google X as part of its project to develop technology for mainly electric cars. The vehicles are taught to navigate through many complicated scenarios on city streets.

These cars use their sensors and software to sense objects like pedestrians, cyclists, vehicles and more and are designed to safely drive around them. The cars use sensors and software to detect objects like pedestrians, cyclists, other vehicles and more (e.g. How to navigate through construction zones), and are designed to safely drive around them. The development has been initiated since 2009 and the work is building towards vehicles that take you to a destination at the push of a button. Components have been added to existing cars like Lexus SUVs, the next step sees designing of a new prototype from the ground up to better explore what should go into a fully self-driving vehicle. This includes removing the steering wheel and pedals, and incorporating software and sensors which will handle the driving.

FTI and innovation

At the heart of the range of products Falcon Technologies International L.L.C., FTI offer is Innovation. Innovation is the key driving force behind our product diversity. FTI has always believed that a strong culture of innovation, in all areas of the company, is an essential contributor to business success. High quality R&D has historically been at the foundation of FTI since it’s inception in 2005, and the company has consistently invested in extensive and innovative product R&D, and in acquiring a world-class, in-house knowledge base at the forefront of the optical digital media technology landscape. With the aim of market longevity and creativity today FTI continues to engage in cutting-edge R&D, internally and in collaboration with partners in academia, research and commerce.

FalconMedia SOUND suits both professional and amateur recording requirements, whether mass producing an audio CD, recording a concert master copy, or facilitating the amateur musician who wants to produce and sell his music on a smaller scale.

FTI’s culture of R&D and innovation go hand-in-hand, with our central commitment to new product development, process and manufacturing improvements, segmented market research and advancements in the science of Optical Digital Media key indicators of how innovation runs through the fabric of FTI’s operations.

Powerful computing and storage implications

Technology has come a long way. We see constant development and growth in terms of computing hardware, software and storage. Although some technologists say, those gains are stalling, perhaps limited in by the physical boundary of raw materials that are used in central processing units.

Supercomputers are developing even faster than consumer-oriented computing technologies

Recently Microsoft thinks it may have found the solution namely field programmable gate arrays (FPGAs). A FPGA is an integrated circuit designed to be configured by a customer or a designer after manufacturing – thus it is said to be “field-programmable”. To define the behavior of the FPGA, the user provides:

a hardware description language (HDL)
or a schematic design.

The HDL form is more optimal for large structures as you can specify them numerically rather than having to draw every piece by hand. However, schematic entry can allow for easier visualization of a design. FPGA allows you flexibility in your designs and is a way to change how parts of a system work without introducing a large amount of cost and risk of delays into the design schedule. Many designers have the false impression that building a system with a modern FPGA means you have to deal with millions of logic gates and a massive amounts of connections just to do something useful. But if that were the case, FPGA use wouldn’t be growing: Instead, there would only be about a half dozen FPGA users left. It turns out FPGA designers have done much of the heavy lifting of adding commonly needed components so all that you have to concentrate on is customizing those functions that are specific to your application. Examples of components produced by designers comprise: clock generators, dynamic random access memory (DRAM) controllers and even whole multicore microprocessors.

This type of computer chip that can be reprogrammed for specific tasks after they leave the factory floor, are adding firepower to Microsoft’s network of on-demand computing power.

What does this mean in real terms?

Using all of the power of Microsoft’s data centers worldwide, the company could translate all 5 million articles on the English language Wikipedia in less than a tenth of a second.

In the past 2 years Microsoft has quietly been installing FPGAs on the new servers; Microsoft added to its global fleet of data centers. They’re present usage includes ranking results in the Bing search engine and speed the performance of Microsoft’s Azure cloud-computing network. Microsoft is alone among major cloud-computing players in widely deploying FPGA technology.

There are also implications for high performance computing and data storage such as solutions for Network Attached Storage (NAS), Storage Area Network (SAN), servers, and storage appliances.

Project Catapult is the technology behind Microsoft’s hyperscale acceleration fabric. The supercomputing substrate is built with the aim to accelerate the efforts in networking, security, cloud services and artificial intelligence.

Project Catapult combines an FPGA integrated into nearly every new Microsoft datacenter server. By exploiting the reconfigurable nature of FPGAs, at the server, the Catapult architecture delivers the efficiency and performance of custom hardware without the cost, complexity and risk of deploying fully customized ASICs into the datacenter. Moreover, the performance gain compared with CPUs is monumental and with less than 30% cost increase, and no more than 10% power increase.

Other FPGA Applications

Due to their programmable nature, FPGAs are an ideal for numerous markets. As the industry leader, Xilinx provides comprehensive solutions consisting of FPGA devices, advanced software, and configurable, ready-to-use IP cores for markets and applications such as:

Aerospace & Defense – Radiation-tolerant FPGAs along with intellectual property for image processing, waveform generation, and partial reconfiguration for SDRs.
Industrial – Xilinx FPGAs and targeted design platforms for Industrial, Scientific and Medical (ISM) enable higher degrees of flexibility, faster time-to-market, and lower overall non-recurring engineering costs (NRE) for a wide range of applications such as industrial imaging and surveillance, industrial automation, and medical imaging equipment.
Medical – For diagnostic, monitoring, and therapy applications, the Virtex FPGA and Spartan® FPGA families can be used to meet a range of processing, display, and I/O interface requirements.
Security – Xilinx offers solutions that meet the evolving needs of security applications, from access control to surveillance and safety systems.
Wireless Communications – RF, base band, connectivity, transport and networking solutions for wireless equipment, addressing standards such as WCDMA, HSDPA, WiMAX and others.

The advancement in computing power and storage capability combined with substantial savings and efficiency introduced through FPGA technology mean the world of supercomputing is more accessible then ever.

At the same time, the advancement of supercomputing technologies automatically means more data storage requirements. Every year world produces more and more data and therefore more and more information needs to be stored. Some information needs to be stored for more extended periods of time like 10-20-30 or even 100 years. There is no better long-term data storage mediums than archival discs.

Falcon Technologies International LLC has developed Century Archival product line, which is a cutting-edge technology with built in Gold or Platinum layers to ensure maximum security, longevity and protection for stored data.

Century Archival products are designed to secure data for hundreds of years – FTI’s Century Archival DVD product has been demonstrated in testing to be capable of storing data for up to 200 years, whereas the Century Archival CD product has demonstrated a longevity in excess of 400 years, making the Century Archival line the most durable and secure archival digital media product available in the market today.

Healthcare Information Technology Market is Expected to Grow

A recent industry report’s findings confirmed the projected growth of the global Radiology Information System (RIS) market and estimated it to reach a value of $980.2 million by 2024. A large segment of major scientific findings and technological advancements go hand-in-hand with the continuously growing demand for Healthcare InformationTechnology (HIT), which makes it one of the key driving forces of the market growth.

IT became an essential part of modern day healthcare industry.

The in-depth research report on Global RIS (Radiology Information System) Market with detailed charts and figures is available HERE.

Healthcare Information Technology is based on several major pillars, one of them being Electronic Medical Records (EMR). It is considered to be one of the most important HIT’s subsystems, that stores, processes and analyses medical data of patients. With the emergence of Radiology Information System (RIS) and Picture Archiving and Communications System (PACS) the entire Healthcare industry has been taken to the next level. Text-based patient records are now backed up by radiology images, that may be stored safely for decades without any risk of being damaged or lost.

Modern technologies take healthcare to the next level

Next generation Healthcare Informational Systems that are being implemented globally to ensure higher business security and patient confidentiality. RIS and PACS are recognised as most efficient systems of electronic imaging management and are gaining popularity in developing economies such as China and India, where the populations are so big that healthcare sector has no other choice but to implement them.

Falcon Technologies International LLC focuses its Research and Development efforts on niche segments of optical media such as HIT and has developed a special product line that meets the sector’s requirements.

FalconMEDIA MEDILINE - specially designed to meet the HIT needs. — FalconMEDIA MEDILINE – specially designed to meet the HIT needs.

FalconMEDIA MEDILINE is an ideal solution for providing the patients with imaging reports, radiology and treatment history. With its use, distribution of medical reports to the patients becomes more cost-efficient and easy task.

All FalconMEDIA MEDILINE products are fully compatible with Picture Archiving and Communications System (PACS) and Digital Imaging and Communications in Medicine (DICOM) standards.